Sonifex Software
DHY-04 Firmware Versions
DHY-04 1.19
- Alterations
- The front panel speed dial buttons are disabled when the Japan Giteki country code is selected. All other front panel controls work normally.
DHY-04 1.18
- Added
- Japan Giteki country code added with the following changes:
- Maximum automatic redial limit of 15 consecutive redials to the same number. Once limit is reached, the same number is not auto redialled again until the unit is restarted. Delay prior to DTMF tone dialling increased to 3.2s. DTMF tone level reduced by 2dB and increased space between each tone to 200ms from 100ms.
- Added support for LED speed indication on new hardware revisions.
DHY-04 1.15
- Alterations
- Updated the help text.
DHY-04 1.14
- Alterations
- Added the ability to send DTMF tones throughout the duration of a call, DTMF tones can be sent either using the online keypad or a DHY-04RC hardware keypad.
- Added an 'Auto Redial Number' field and an 'Enable Auto Redial' checkbox to the 'Config' webpage. If 'Enable Auto Redial' is selected the device will automatically redial the number in the 'Auto Redial Number' field when the call is dropped, if the 'Auto Redial Number' field is empty the last connected number will be redialled.
- Modified the 'Dialler' webpage. A name for a saved speed dial number is now shown next to the corresponding speed dial button.
- Added a 'Factory Reset' button to the 'Update' webpage which completely resets the device.
- Solved a bug related to the duration of DTMF tones during the call, preventing the board lockup.
DHY-04 1.13
- Alterations
- The format of the serial error response codes have been changed to decimal.
- The initial 'v' within the "VER:" and "BSV:" commands response has been deleted.
- The command "TEL:" is now working properly.
DHY-04 1.12
- Alterations
- Fixed a bug which sometimes caused lock up and/or undesired dropping of calls.
- GPO Remote output functions now correspond to the selection on the web server.
- Fix for country code selection (DIP Switches).
DHY-04 1.08
- Alterations
- Rebalanced gains for unity through telephone line
- Fixed: Bug in remote dial
DHY-04 1.04.68
- Alterations
- Added Telstra disconnect tone
- Improved multicast packet handling
- Fixed User Disconnect parameter updates
DHY-04 1.04.67
- Alterations
- DTMF generate high freq set +2db cf low freq
- DTMF dial hold off for 3 secs (TBR21 requirements)
DHY-04 1.04.66
- Alterations
- DTMF Detect updated range and default for threshold
DHY-04 1.03.65
- Alterations
- Added DEF: serial cmd and 0x40f msg for factory defaults
- Factory reset after 3 resets each within 5-10 secs
- DHY_04 Dialler page fix
DHY-04 1.03.62
- Alterations
- Updated code to handle new QSPI Flash memory
DHY-04 1.03.61
- Alterations
- Update for stack and support for QSPI Flash devices
DHY-04V Firmware Versions
DHY-04V 1.21
- Alterations
- Updated network registration process for 4G.
- Added specific network setup and registration for operators in Australia.
DHY-04V 1.20
- Alterations
- Fixed noise gate audio level bug.
DHY-04V 1.19
- Alterations
- Added support for new 4G GSM module.
DHY-04G/HD Firmware Versions
DHY-04G/HD 1.16
- Alterations
- Added LED speed indication for the new hardware.
- Software package update to allow for the above.
DHY-04G/HD 1.15
- Alterations
- Fixed bug refresh web page drops speed dialled call or incoming call.
DHY-04G/HD 1.14
- Alterations
- Set dialler page as default when logging in at level 1.
DHY-04G/HD 1.13
- Alterations
- Added option to hide memory dial numbers on main/dialler web pages.
- Added option to auto logout level 2 users only.
- Increased font size and added colours for call status in main/dialler pages.
DHY-04G/HD 1.12
- Alterations
- Updated the help text.
DHY-04G/HD 1.11
- Alterations
- Added the ability to send DTMF tones throughout the duration of a call, DTMF tones can be sent either using the online keypad or a DHY-04RC hardware keypad.
- Added a 'DTMF Pin' field and an 'Enable Auto Send of DTMF Pin' checkbox on the 'Config' webpage. If 'Enable Auto Send of DTMF Pin' is selected the 4 digit pin in the 'DTMF Pin' field is sent automatically on the establishment of a call.
- Added an 'Auto Redial Number' field and an 'Enable Auto Redial' checkbox to the 'Config' webpage. If 'Enable Auto Redial' is selected the device will automatically redial the number in the 'Auto Redial Number' field when the call is dropped, if the 'Auto Redial Number' field is empty the last connected number will be redialled.
- Modified the 'Dialler' webpage. A name for a saved speed dial number is now shown next to the corresponding speed dial button.
- Added a 'Factory Reset' button to the 'Update' webpage which completely resets the device.
DHY-04G/HD 1.10
- Alterations
- The format of the serial error response codes have been changed to decimal.
- The initial 'v' within the "VER:" and "BSV:" commands response has been deleted.
- The command "TEL:" is now working properly.
DHY-04G/HD 1.09
- Alterations
- Fixed a bug which sometimes caused lock up and/or undesired dropping of calls.
- GPO Remote output functions now correspond to the selection on the web server.
DHY-04G/HD 1.08
- Alterations
- Fixes the missing 'Drop Call' from the webpage when HD calls are made.
DHY-04G/HD 1.05.66
- Alterations
- New range and threshold for DTMF Detect
- Changes for HD call states to show call quality
DHY-04G/HD 1.04.65
- Alterations
- Updated code to handle SIM Access Code
- DHY_04 Dialler page fix
DHY-04G/HD 1.04.64
- Alterations
- Fix dialling bug when no 'w' in dial string
DHY-04G/HD 1.04.63
- Alterations
- Updated code to handle SIM Access Code
- Factory reset after 3 resets each within 5-10 secs
- Dial out supports DTMF send after 'w' in string
- DTMF Send now via AT+_VTS=string command
DHY-04G/HD Module 1.04
- Alterations
- Modified to allow for HD Voice Messaging
