Sonifex Software
CM-TB8 Firmware Versions
Version |
Release Date |
Notes |
CM-TB8 | ||
| V1.1.6 | 14/09/2017 |
- Added support for new flash device SST26VF032B. - Increased size of web page generation buffer to prevent overflow. |
| V1.1.5 | 27/02/2017 | - Changed IP address default to 0.0.0.0 when DHCP enabled as some switches fail to respond when a static IP address has already been assigned |
| V1.1.4 | 27/06/2016 | - Changed GSM initialisation to include USIM application for newer module firmware revisions that fix network registration failure for some SIMs |
| V1.1.3 | 13/08/2015 | - Text error on load settings webpage |
| V1.1.2 | 05/08/2015 | - Added group talk exclusive mode option - Fixed reset config to defaults on power up |
| V1.1.0 | 29/09/2014 | - Changed GSM network registration check to include roaming option |
| V1.0.9 | 03/04/2014 | - GSM and PSTN web page changes |
| V1.0.8 | 31/03/2014 | - Added audible call end signal with option on GSM web page - Added dynamic info to GSM web page - Added call control to GSM web page - Added call logs to GSM web page - Added module reset to GSM web page |
| V1.0.7 | 30/01/2014 | - Fixed factory remote commands - Changed write serial number command to allow TL numbers |
| V1.0.6 | 19/12/2013 | - Added support for GSM2 expansion card - Added firmware validity check when updating - Increased web page update to 27 seconds after firmware update |
| V1.0.5 | 20/05/2013 | - Various bug fixes and changes for PSTN2 expansion card |
| V1.0.3 | 05/02/2013 | - Fixed bug saving ethernet options by removing packed attribute |
| V1.0.2 | 11/12/2012 | - Infrared receiver test added to test mode 2 - Added reset config defaults and reset talk level commands |
| V1.0.1 | 10/12/2012 | - LED Test mode changed to illuminate level led 1 red on start - LED Test mode changed to remove amber cycle |
| V1.0.0 | 07/12/2012 | - Intial release. |
