Mixing Consoles - Input Channels
S2-C6SS 6 Way Stereo Source Select Channel with EQ
The 6 way stereo line source select channel has 6 balanced stereo inputs on a 25 way D-type connector selectable by a 6 way mechanical interlocking switch bank, numbered 1 - 6. A depressed button indicates the selected input. The switch bank also controls 6 sets of remote outputs allowing each source to have a set of start/stop remotes. The remote starts can be set as momentary or latching.
Continuous momentary start can also be enabled such that when the fader is up and the channel is on, each press of the ON button triggers a momentary start. The channel is fitted with EQ as standard and other functions are similar to the S2-CSE Dual Stereo channel with EQ.
The HF and LF controls are used to adjust the equalisation of the signal. The HF control boosts and cuts the signal by 10dB at 6.5kHz. The LF control boosts and cuts the signal by 10dB at 100Hz. The EQ button places the equalisation in and out of the signal path and is illuminated yellow when the EQ is active. The channel can be used to control either one of two separate timer displays.
S2-C6SS 6 Way Stereo Source Select
Channel With EQ and Rear.
S2-CSG Stereo Line With Gram (S2-CSGE with EQ), S2-CS Dual Stereo (S2-CSE with EQ), S2-CDS Digital Dual Stereo (S2-CDSE with EQ), S2-CSMM Stereo Mix Minus and S2-C6SS Stereo Source Select.
