Where To Order

Products By Category

Mixing Consoles - S2 Script Space

S2 Script Space (S2-7SS)

S2 logo The script space occupies an area of 7 channel widths, and is designed to hold documents or scripts for the mixer operator when desk space is at a premium. The S2-7SS Script Space is 266mm wide x 390mm deep.

S2-7SS image

S2-7SS Script Space.

Technical Specification For S2
Input/Output Impedances
Mic Input:	> 1k5Ω electronically balanced
Mono Line Input:	> 20kΩ electronically balanced
Stereo Line Input:	> 20kΩ electronically balanced
PGM & AUD Output:	< 75Ω electronically balanced
Mono Output:	< 75Ω electronically balanced
Monitor Outputs:	< 75Ω unbalanced
AES Input/Output:	110Ω
S/PDIF Input/Output:	75Ω
BNC Wordclock input:	50Ω

Input/Output Gain Range
Mic Input:	Preset pot +13dB to +66dB ref -50dBu, TRIM pot ±12dB
Mono Line Input:	Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Stereo Line Input:	Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Telco Input:	Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Telco Output:	Preset pot -6dB to +4dB ref 0dBu
Mix Minus Input:	Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB
Mix Minus Output:	Preset pot -3dB to +3dB ref 0dBu
Digital Input:	0dBFS = +12dBu on input; TRIM pot ±12dB allowing 0dBu to +24dBu
Digital Output:	0dBFS = +18dBu

Frequency Response
Mic Input:	40Hz to 20kHz, -1dB,+0dB (-3dB at 130Hz with HPF in)
Line Inputs:	20Hz to 20kHz, - 0.5dB,+0dB
RIAA Input:	30Hz to 16kHz ±1.5dB RIAA equalised

Noise (20Hz to 20kHz)
Mic Input E.I.N.:	-129dB with 150Ω source
Stereo Inputs (fader down, no routing):	-89dB ref 0dB
Stereo Inputs (fader down, one channel routed):	-89dB
Stereo Inputs (unity gain, no routing):	-89dB
Stereo Inputs (unity gain, one channel routed):	-86dB
Stereo Inputs (unity gain, two channels routed):	-83dB

Distortion
Total Harmonic Distortion:	0.015% at 1kHz, 0dB 0.025% at 10kHz, 0dB

Crosstalk
Inter-channel:	< -90dBu
Stereo:	-90dBu at 1kHz

Equalisation
LF Shelving at 100Hz:	±7dB
HF Shelving at 6.5kHz:	±7dB

Range
Pan Range:	off/-3dB centre/off
Balance Range:	±6dB

Common Mode Rejection Ratio
Mic Input:	> 100dB at 70dB gain

Digital I/O
Sync Input Sample Rate:	30kHz - 100kHz
Output Sample Rates (Using Onboard Clock):	32kHz, 44.1kHz, 48kHz, & 96kHz
Output Sample Width:	16, 20, 24 bit (24 bit on V2 ODA/ODP)

Output
Headphone Output Load:	>45Ω, 400Ω recommended
Maximum Output (Analogue):	+26dBu balanced into 2kΩ or greater

Power
Power (S2-PSU):	Filtered IEC, switchable 115V, 230V, fused, 210W max.
Dimensions (S2-PSU): (Raw):	48cm (W) x 24.3cm (D) x 8.8cm (H) 19” (W) x 10” (D) x 3.5” (H)
Dimensions (S2-PSU): (Boxed):	51cm (W) x 41.5cm (D) x 17cm (H) 20” (W) x 16.3” (D) x 6.7” (H)
Weight (S2-PSU):	Nett: 6kg Gross: 7.8kg Nett: 13.2lbs Gross: 17lbs
Dimensions (S2-PSUS): (Raw):	48cm (W) x 23cm (D) x 4.4cm (H) 19” (W) x 9” (D) x 1.7” (H)
Dimensions (S2-PSUS): (Boxed):	55cm (W) x 39.3cm (D) x 8.5cm (H) 21.6” (W) x 15.5” (D) x 3.4” (H)
Weight (S2-PSUS):	Nett: 1.58kg Gross: 2kg Nett: 3.5lbs Gross: 4.4lbs