Facebook Logo Twitter Logo Instagram You Tube Logo LinkedIn Logo
Sonifex Logo

Hersteller von Audioprodukten für AV,
Installed Sound, Broadcast Radio & Broadcast TV

Österreicher Schweizer Deutsch English
  • Über uns
    • Firmenprofil
    • Maßgeschneiderte Entwicklungen
    • GDPR-Anweisung (Englisch-Webseite)
  • Technischer Support
    • Garantie & Registrierung - Österreich
    • Garantie & Registrierung - Suisse
    • Garantie & Registrierung - Deutschland
    • Service & Reparatur - Österreich
    • Service & Reparatur - Suisse
    • Service & Reparatur - Deutschland
    • Software Downloads (Englisch-Webseite)
    • Handbücher (Englisch-Webseite)
    • FAQ(Englisch-Webseite)
    • Lexikon technischer Ausdrücke (Englisch-Webseite)
    • Infoanfragen (besuche in Englisch Website)
    • Nicht mehr hergestellte Produkte
    • Declarations (Englisch-Webseite)
  • Verkauf & Vermietung
    • Verkauf
    • Weltweiter Vertrieb
    • Vermietung (nur UK)
  • Neuigkeiten, Events & Marketing
    • Pressemeldungen
    • Kataloge, Handbücher & Abbildungen
    • Auszeichnungen
  • Kontakt
  • Newsletter bestellen
  • Sitemap
  • Home > 
  • Matching Converters > 
  • CM-LUX1
Suche 

Produkte nach Kategorie

  • Abhör-Controller
  • Anpassverstärker
  • AoIP
  • Audio-
    Verteilverstärker
  • Audio Logging
  • Belt-Packs
  • Beschilderung
  • Delays
  • Digital-Audio-Wandler
  • Dolby ® Encoders
    & Decoders
  • Fernsteuerung
  • Gegensprechanlage
  • IP Streamers
  • Kommentar
  • Kompressoren/Limiter
  • Kopfhörer-Verstärker & -Verteiler
  • Lautsprecherhalterungen
  • Mikrofonvorverstärker
  • Mixers
  • Netzspannungs-Fernschalter
  • Passivpackungen
  • Pegelmeter
  • Phantomspeisung
  • Quellwähler
  • Rack-Abhörmonitore
  • Radio-Capture-Karten
  • Radio-Studio-Packs
  • Sendeausfalldetektoren/
    Modulationswächter
  • Soundkarten
  • Stereo-zu-Mono-Umsetzer
  • Studiomöbel
  • Synchronisers
  • Talkback & IFB
  • Telefonie-Produkte
  • Tongeneratoren
  • Uhrzeit-Server
  • Umschalter
  • Video Embedder/
    De-embedder
  • Video-Verteilverstärker
  • Voiceover
  • Zubehör

Category: Matching Converters



cm-lux1
cm-lux1
cm-lux1
cm-lux1
Perspektivischen Darstellung
Frontansicht
Rückansicht
Hochauflösende Gesamtansicht >>
Hochauflösende Frontansicht >>
Hochauflösende Rückansicht >>

Studiohub logo

StudioHub+™ is a registered trademark of Radio Systems Inc.

CM-LUX1 Balanced to Unbalanced Audio Converter.

CM-LUX1 Balanced to Unbalanced Audio Converter

This product allows the connection of a stereo balanced line input via 2 x female XLRs to a stereo unbalanced output on phono connectors.

It is transformer balanced, with a 2:1 ratio, so 6dB of attenuation is added to the input to help interface with the lower signal levels associated with consumer outputs.

This unit is a passive version of the RB-LU4 (though only 1 x stereo channel), and provides you with an alternative to having to interface a balanced output to an unbalanced input via specialist cables (either by shorting the non-phase to ground or disconnecting it).

It is particularly useful where a shared balanced audio feed needs interfacing to an unbalanced input on one or more pieces of equipment. Using a CM-LUR1 or CM-LUX1 galvanically isolates the audio, allowing you to connect via phono cables to an unbalanced input without compromising the distributed feed.

Block Diagram

cm-lux1 Diagram

Analogue Inputs

The stereo analogue input is on two female 3 pin XLR connectors with the following pin assignments:
Pin 1: 0V Common
Pin 2: Phase
Pin 3: Non Phase

RCA Phono Analogue Outputs

This unit uses a stereo unbalanced line output on a RCA phono connector with the following connections:

Pin Type Connection
White Tip: Left
White Screen: Ground
Red Tip: Right
Red Screen: Ground

 

CM-LUX1 Technical Specification

Audio Specification

 

Input/Output Level Ratio: 2:1
Input/Output Impedance Ratio: 4:1
Max Input Level: +28dBu
Max Output Level: +22dBu
Frequency Response: 20Hz to 20kHz, +0/-0.5dB
Noise: <-115dBu A-wgtd
Distortion Ref +8dBu (Output): <0.01%
Common Mode Rejection: >80dB
   

Connections

 
Balanced Line Input:: 2 x female XLRs
Unbalanced Line Output: 2 x RCA phono connectors
   
   

Equipment Type

 
CM-LUX1: Balanced to unbalanced audio converter, XLR input 
   

Physical Specification

 
Dimensions (Raw): 7.7cm (W) x 8.3cm (D) x 4.2cm (H)
3.0” (W) x 3.3” (D) x 1.7” (H)
Dimensions (Boxed): 12.7cm (W) x 22.9cm (D) x 7.6cm (H)
5” (W) x 9” (D) x 3” (H)
Weight: Nett: 0.22kg Gross: 0.33kg
Nett: 0.49lbs Gross: 0.73lbs

 

Mehr Informationen zu diesem Produkt

  • Broschüre
  • Handbuch
  • Zubehör & Ersatzteile
  • Software-Updates
  • Anwendungsbeispiele

Bestellung

  • Ihr zuständiger Vertriebspartner
  • Ihr zuständiger Vertriebspartner
  • Ihr zuständiger Vertriebspartner
  • Weltweit

Produkte nach Serie

  • AVN
  • DHY-04
  • Flashlog
  • HY-03
  • Net-Log
  • Pro Audio-Streamer
  • Redbox
  • Reference Monitors
  • S0v2
  • S1
  • S2
  • S2 Solutions
  • SignalLED
  • Talkback, IFB & Kommentar

IABM Members Logo Ravenna Logo

Sonifex Ltd. 61 Station Road, Irthlingborough, Northants, NN9 5QE, UK. Tel: +44 (0)1933 650700 Fax: +44 (0)1933 650726 EMail: sales@sonifex.co.uk